CommScope Automatic Membrane Dehydrator

(No reviews yet) Write a Review

$3,088.44

Brand

CommScope

SKU:

PMT200B-81315

Weight:

58.30 LBS

Description
0 Reviews

DryLine® Dehydrator, Low-pressure membrane, wall mountable, 3.0 psig, with discrete alarm, 115 Vac, 50/60 Hz, includes four individually-valved output ports

PMT200B DryLine® Automatic Membrane Dehydrator

The world-class dehydrator for low-volume systems.

This addition to the family of DryLine® pressurization equipment provides the industry with a fully automatic dehydrator with an expanded range that cover systems with volumes from 0.01 to 1700 liters (0.01 to 60 cubic feet). Low and medium volume cellular, broadcast, and microwave systems now can be pressurized with equipment that functions without the need for bypass kits and ancillary air tanks. The PMT200B offers operational reliability, a technologically advanced drying mechanism, easy installation, and a warranty that is the best in the business.

The PMT200B is a superior alternative to bottled nitrogen gas and desiccant dehydrators, especially at remote sites. The unit minimizes the maintenance associated with nitrogen tanks and manually regenerative systems. The PMT200B uses automatic pressure sensing and microprocessor control to activate and deactivate an air compressor, operating only when needed to maintain pressure in an internal reservoir tank, improving efficiency for reduced wear and maintenance.

The PMT200B features an electronic compressor control module that incorporates precise pressure sensing with microprocessor control circuitry to control compressor cycles and provide system monitoring.

DryLine® equipment offers the best performance available in any type of dehydrator. Moisture is separated from the airstream and vented to the outside. The simplicity in the membrane cartridge design eliminates the parts required for pressure swing or heat regenerative dehydration. Our three-year/3,000 hour warranty assures your dehydrator will operate more dependably than any other unit in its class. The unit also features reduced noise and minimum vibration. This membrane is designed to operate at 50 psig, increasing compressor life up to 100% over the older 90 psig membrane units.

The cabinet is factory-configured for mounting directly to a wall. The PMT200B provides front air, and alarm connections of the PMT200B are accessible from the top of the cabinet, when mounted on a wall, cabinet, or on a shelf or floor.

Alarm Options: The PMT200B includes a low-pressure alarm which closes at 1.0 psig (68 mbar) and an excess run alarm. The standard alarm package provides a single contact closure for the three alarms, functioning as a summary alarm, high humidity alarm factory set at 7.5% RH, as well as discrete contacts for each alarm. An approved terminal block is provided for the alarm outputs.

Electrical Connections: Units designed for use throughout the world. The ac input to the compressor is rated for both 50 and 60 Hz operation. Units are equipped with a UL/CSA cord set or stripped leads harmonized cord set.

4-Port Distribution: Dry air distribution is incorporated into the basic dehydrator design. Shut-off valves control a 4-port manifold function that splits the air stream into four independent outputs. Bulkhead compression fittings are supplied on the cabinet that accept 3/8-inch polytubing to connect to the transmission line.

Front Mounted Controls and Status Indicators:

Digital LCD display for alarm and system status
Dual display modes for system status and last event
Compressor run-time alarm
Integral 4-port manifold with shut-off valves

Write a Review