US Dollar
DryLine® Dehydrator, Low-pressure membrane, 19 in rack mountable, 3.0 psig, with discrete alarm, 115 Vac, 50/60 Hz
MT050B DryLine® Automatic Membrane Dehydrator
The world-class dehydrator for low-volume systems.
This addition to the family of DryLine® pressurization equipment provides the industry with a fully automatic dehydrator with an expanded range that covers systems with volumes from 0.01 to 1700 liters (0.01 to 60 cubic feet). Low and medium volume cellular, broadcast, and microwave systems now can be pressurized with equipment that functions without the need for bypass kits and ancillary air tanks. The MT050B offers operational reliability, a technologically advanced drying mechanism, easy installation and a warranty that is the best in the business.
The MT050B is a superior alternative to bottled nitrogen gas and desiccant dehydrators, especially at remote sites. The unit minimizes the maintenance associated with nitrogen tanks and manually regenerative systems. The MT050B uses automatic pressure sensing and microprocessor control to activate and deactivate an air compressor, operating only when needed to maintain pressure in an internal reservoir tank, improving efficiency for reduced wear and maintenance.
The MT050B features an Electronic Compressor Control Module that incorporates precise pressure sensing with microprocessor control circuitry to control compressor cycles and provide system monitoring.
DryLine® equipment offers the best performance available in any type of dehydrator. Moisture is separated from the airstream and vented to the outside. The simplicity in the membrane cartridge design eliminates the parts required for pressure swing or heat regenerative dehydration. Our three-year/3,000 hour warranty assures your dehydrator will operate more dependably than any other unit in its class. The unit also features reduced noise and minimum vibration. This membrane is designed to operate at 50 psi, increasing compressor life up to 100% over the older 90 psi membrane units.
The MT050B is designed to mount in an equipment rack, set on a shelf, or on the floor. The MT050B provides front access for the maintenance and operational controls. Power, air, and alarm connections of the MT050B are accessible from the rear of the cabinet.
Standard Alarms The MT050B includes a low-pressure alarm, excess run alarm, and power fail alarm. The standard alarm package provides a single contact closure for the three alarms, functioning as a summary alarm, as well as discrete contacts for each alarm. An approved terminal block is provided for the alarm outputs.
Electrical Connections Units designed for use throughout the world. The ac input to the compressor is rated for both 50 and 60 Hz operation. Units are equipped with a UL/CSA cord set or a stripped leads harmonized cord set.
Front mounted controls and status indicators include:
The MT050B features an Electronic Compressor Control Module that incorporates precise pressure sensing with microprocessor control circuitry to control compressor cycles and provide system monitoring.
DryLine® equipment offers the best performance available in any type of dehydrator. Moisture is separated from the airstream and vented to the outside. The simplicity in the membrane cartridge design eliminates the parts required for pressure swing or heat regenerative dehydration. Our three-year/3,000 hour warranty assures your dehydrator will operate more dependably than any other unit in its class. The unit also features reduced noise and minimum vibration. This membrane is designed to operate at 50 psi, increasing compressor life up to 100% over the older 90 psi membrane units.
The MT050B is designed to mount in an equipment rack, set on a shelf, or on the floor. The MT050B provides front access for the maintenance and operational controls. Power, air, and alarm connections of the MT050B are accessible from the rear of the cabinet.
Standard Alarms The MT050B includes a low-pressure alarm, excess run alarm, and power fail alarm. The standard alarm package provides a single contact closure for the three alarms, functioning as a summary alarm, as well as discrete contacts for each alarm. An approved terminal block is provided for the alarm outputs.
Electrical Connections Units designed for use throughout the world. The ac input to the compressor is rated for both 50 and 60 Hz operation. Units are equipped with a UL/CSA cord set or a stripped leads harmonized cord set.
Front mounted controls and status indicators include:
- Digital LCD display for alarm and system status
- Dual display modes for system status and last event
- Compressor run-time alarm
0 Reviews Hide Reviews Show Reviews
CommScope
CommScope 115VAC Dryline Automatic Membrane Dehydrator
MOJAVE1
$2,650.73
Andrew Solutions MOJAVE1 is a Dryline automatic membrane dehydrator for low and medium volume cellular, broadcast and TMW systems. This dehydrator is 19" rack mountable and 5 rack units (5RU) high...
ANR
ANR Automatic Dehydrator 115VAC
MT050B-81015
$2,690.00
ANDREW Automatic Membrane Dehydrator 5 PSI, 115 VAC, 50/60 HZ, Alarms for low pressure, high humidity, excess run and power fail, US cord, install acc. incld. Product Small Automatic Membrane...
CommScope
CommScope Automatic Membrane Dehydrator
PMT200B-81315
$3,088.44
DryLine® Dehydrator, Low-pressure membrane, wall mountable, 3.0 psig, with discrete alarm, 115 Vac, 50/60 Hz, includes four individually-valved output ports PMT200B DryLine® Automatic Membrane...
CommScope
CommScope Automatic Dehydrator 240VAC
MT500B-81026
$3,574.00
ANDREW Automatic membrane dehydrator for use with air dielectric cables.Includes low pressure high humidity power fail & excess run alarms.240 Vac
ANR
ANR 115VAC Dryline Automatic Membrane Dehydrator
MOJAVE1A
$2,900.00
Andrew Solutions MOJAVE1A is a Dryline automatic membrane dehydrator for low and medium volume cellular broadcast and TMW systems. This dehydrator is 19 rack mountable and 5 rack units (5RU) high...