ROHN face dish mount with 5 ft. long (2-3/8" OD) stndard pipe for use with 45G tower sections. Not to be used without proper design consideration.

ROHN Leg bracket assembly for supporting coav. (3) 7/16 holes (3) 3/4" holes. Works on all ROHN G-series towers. Includes (1) bracket with hardware

ROHN 150'safety cable for use with PMR6 non-penetrating antenna tripod mounts. Helps to keep tripod on the roof in severe winds.

ROHN concrete base bolts with double nut For use with ROHN 25G hinged base plate. Four (4) bolts required for installation of 25G hinged base plate (SKU 21695)

ROHN 65G 10' tower section. Requires hardware kit. COMP ONLY **Not for Resale

ROHN 55G work platform for attachment to 55G tower section. Snaps into place no bolts required. Hot dip galvanized, use with R-SR55 safety ring.

ROHN torque bar for use with 25G guy bracket. Each torque bar requires 3/8-in shackle for attachment to guy strand. Hot dip galvanized steel construction.

ROHN 25G base plate. For rooftop installations. Section attachment hrdw sold seperately P/N 25JBK sku 43652. Attachment hrdwr for rooftop not includ

ROHN Ballast Roof Mount. 36" overall mast height - 3" standard - 3.5" OD. 6 1/2 ft square frame. .

ROHN torque arm stabilizer assembly for 45G towers. Anti-twist device located in antenna mounting areas. Attached with section joint bolts.

ROHN non-penetrating roof mount for communication antennas. Mast is 2 3/8"OD, 10' tall & in 2 pieces. Designed for concrete block ballast. 62" square.

ROHN 45G guy bracket assembly. Mounts to tower at any horizontal brace. Used to attach guy wires to tower. Use with optional torque bars (49372).

ROHN non-penetrating roof mount for wireless cable, DBS or TV antennas. Mast is 1.66"OD and 30" tall. Designed for concrete block ballast 36" square.

ROHN Work Platform for attachment to a 45G Tower section. Snaps into place no bolts required. Hot dip galvanized, use with R-SR245 safety ring (38131).

ROHN base bolt assembly. 5/8" x 12"