Rohn Products, LLC

ROHN 1-1/4" OD x 120" hot dip galvanized masts. 16 gauge. Swaged with locking joint. .

ROHN 1-1/4" OD x 120" pre-galvanized 16 gauge mast. Swaged with locking joint at one end.

ROHN 1-1/4" OD x 60" pre-galvanized 16 gauge mast. Swaged with locking joint at one end. .

ROHN 1-1/4" x 59.50" Mast for non- penetrating Roof Mount. 16 GA galvanized steel. FRM Series.

ROHN 1.0×4.25 galvanized bolts

ROHN 1/2" - 3/4" guy wire ground clamp.

ROHN 1/2" x 12" eye + jaw turnbuckle. Hot dip galvanized. 11,000 lbs ultimate strength. .

ROHN 1/4" heavy-duty steel thimble. For use with 3/16" wire. Completely hot-dip galvanized. .

ROHN 1/4" standard steel thimble. For use 1/8" to 3/16" wire. Completely hot-dip galvanized. .

ROHN 100 Foot 65G Tower Climbing Safety Cable System. For use with a Vertical Fall Arrest Protection System.

ROHN 100' Tuf-Tug Safety Cable for RSL tower.

ROHN 12' erection fixture for towers with 1-1/4" side rails. Use for both the 25G and 45G tower sections. .

ROHN 150'safety cable for use with PMR6 non-penetrating antenna tripod mounts. Helps to keep tripod on the roof in severe winds.

ROHN 150ft Tuf-Tug Safety Ladder. Order harness and wire grab separately.

ROHN 18" clearance galvanized wall mount Includes upper and lower bracket. Will support mast up to 2-3/4" O.D. and installs using up to 5/16" bolts.