CommScope DryLine Dehydrator Low-pressure Membrane

(No reviews yet) Write a Review

$8,330.00

Current Stock:

Alarm
Alarm Type	Summary
Excess-Run Alarm	10 minutes, factory set
Low-Pressure Alarm	68 mbar \| 7 kPa \| 1 psig

Dimensions
Net Weight	25.0 kg \| 55.0 lb
Product Depth	381.0 mm \| 15.0 in
Product Height	266.7 mm \| 10.5 in
Product Width	431.8 mm \| 17.0 in

Electrical Specifications
Power Cord	Europe power cord with stripped leads \| USA power cord
Voltage	208/240 Vac ±10%
Alarm Contact Rating	Form C dry contacts, 2 amps at 30 Vdc
Operating Temperature	-10 °C to +40 °C (+14 °F to +104 °F)
Power Consumption, average	925.0 W
Power Frequency	60/50 Hz
Power Phase	Single
Suggested Circuit Breaker Size	20 A
Circuit Breaker Requirement	Electrical connections require separate circuits for dehydrator installation

General Specifications
Dehydrator Type	Automatic Membrane
Voltage Type	ac
Volume Capacity, minimum	2830.0 L \| 100.0 ft³
Volume Capacity, maximum	31150.0 L \| 1100.0 ft³
Brand	DryLine®
Cut In/Out Pressure Type	Factory set
Cut In Pressure	14.0 kPa \| 2.0 psig
Cut Out Pressure	34.0 kPa \| 5.0 psig
Dew Point	Better than -45 °C (-50 °F) at 95% RH at +40 °C (+104 °F)
Flow Rate	56.3 SLPM \| 2.0 SCFM
Includes	3/8 in polyethylene tubing \| 90º elbow fitting \| Ball valve \| Male connector fitting \| Power cord \| Power cord connector lock \| PTFE tape \| Screws
Mount Type	Floor
Port Count	1
Port Type	3/8 in PE tube
Rack Type	EIA 19 in
Rack Units	6