ROHN 45G top plate. Converts standard section to a top section with a 2 1/4" dia. hole. Can be used with a 50096 or 88489 thrust bearing.

ROHN 25G top section for use with comm- unication antenna. 1.25" OD support tube extends 18" above apex of side rails. 1-1/4" N.P.T. Threaded end.

ROHN 1/2" x 12" eye + jaw turnbuckle. Hot dip galvanized. 11,000 lbs ultimate strength. .

ROHN 1-1/4" OD x 120" hot dip galvanized masts. 16 gauge. Swaged with locking joint. .

ROHN face mount assembly for 25G towers. Includes 2-3/8" OD x 5' pipe, (2) angle mounting clips, (4) 1/2 x 1.5 bolt assy, (8) 3/8" U bolts and (4) 3/8" U bolts.

ROHN 25G general purpose communication tower section. 7-ft length. 1.25in steel tubing. Triangular design with 12.5-in face.Zig-zag bracing.Hot dip galvanized.

ROHN 25G guy bracket used to enable attachment of guy wires to tower sections. Can be used with the optional torque bars (63310).

ROHN non-penetrating roof mount for wireless cable, DBS or TV antennas. Mast is 1.50"OD and 30" tall. Designed for concrete block ballast 36" square.

ROHN 25G Top Section. 9-ft high. 2-in OD mounting pipe rises 8.25-in above apex of side rails. Includes built-in bushing and antenna bolt holes.

ROHN 3/8"x6" eye + eye turnbuckle. Hot dip galvaized. 6,000 lbs ultimate strength. .

ROHN thrust bearing. Used on 18473 top section or 98481 top plate for top mounting 3" OD antenna support pipe. .

ROHN 1-1/4" OD x 60" pre-galvanized 16 gauge mast. Swaged with locking joint at one end. .

ROHN 25G Top Plate. Converts a standard 25G section to a top section. Includes guy lugs. Can be used for mounting the ROHN TB3 and TB4 thrust bearings.

ROHN 55G torque bar with sleeve. Use with GA55GD guy bracket. Order 1/2" maximum size shackle separately. **3 Required for most applications.

ROHN Ballast Roof Mount. Square shape, non-penetrating, hot dip galvanized. 10 foot long, 4.5" diameter size. Covers 100 sq. ft. of roof surface.