CommScope Tower Mounted Amplifier Diplexed 1900/850 Bypass

(No reviews yet) Write a Review

$887.04

Brand

CommScope

SKU:

E15S09P56

Weight:

10.00 LBS

Shipping:

Calculated at Checkout

Description
0 Reviews

Tower Mounted Amplifier, Diplexed 1900/850 Bypass

PCS Dual Duplex Tower Mounted Amplifier/Diplexer
1900 MHz TMA Shared Feeder, with 850 MHz Bypass

Designed for the highest reliability even in the most demanding installation environments.

The tower mounted amplifiers from Andrew Solutions help optimize network performance and represent the ideal solution for coverage and capacity enhancement.

By improving uplink performance, Andrew Solutions tower mounted amplifiers (TMAs) ensure optimum coverage of fringe areas, weak spots, and indoor locations. The unit is easy to install in any wireless system and provides:

Improved sensitivity—reducing dropped calls and failed connection attempts. Enhanced signal quality—improving voice clarity and data transmission speed. Lower handset output—extending talk time and reducing interference in GSM/EDGE, UMTS, and CDMA systems.

The self-contained body is engineered to ensure the highest reliability in severe environments while featuring a very compact size and attractive appearance.

The PCS TMA/diplexer includes pole mounting hardware. It can be wall mounted with user-provided fasteners.

12 dB gain
Full band operation
Multi-stage lightning protection
Sealed to protection class IP67
In-line connectors
Failsafe low noise amplifier (LNA) bypass

Technical Specifications

Electrical Specifications Rx (Uplink)
Bandwidth	60.00 MHz
License Band	PCS
Frequency Band	1850 – 1910 MHz
Gain	12 dB
Gain Tolerance	±1
Noise Figure, Mid Band, typical	1.20 dB @ 12 dB
Noise Figure, Full Band, typical	1.50 dB @ 12 dB
Output IP3, minimum	22 dBm @ 12 dB
Return Loss, minimum	18 dB
Insertion Loss, Bypass Mode, typical	2.00 dB
Return Loss, Bypass Mode, typical	18 dB
Group Delay Variation, maximum	50 ns @ 5.00 MHz
Total Group Delay, maximum	150 ns

Electrical Specifications Tx (Downlink)
Bandwidth	60.00 MHz
Insertion Loss, maximum	0.70 dB
License Band	PCS
Frequency Band	1930 – 1990 MHz
Return Loss, minimum	18 dB
3rd Order IMD	-107 dBm
3rd Order IMD Test Method	Two +43 dBm carriers
Input Power, RMS, maximum	300 W
Input Power, PEP, maximum	3000 W
Group Delay Variation, maximum	15 ns @ 5.00 MHz
Total Group Delay, maximum	50 ns

Electrical Specifications 2 Tx (Downlink)
Bandwidth	70.00 MHz
Insertion Loss, maximum	0.30 dB
License Band	Cellular
Frequency Band	824 – 894 MHz
Return Loss, minimum	18 dB
Input Power, RMS, maximum	500 W
Input Power, PEP, maximum	5000 W
Group Delay Variation, maximum	6 ns @ 5.00 MHz
Total Group Delay, maximum	7 ns

Electrical Specifications
Voltage	10–18 Vdc
Operating Current at Voltage	100 mA @ 12 V
Operating Current Tolerance	±15 mA
Alarm Functionality	CWA
Failure Current Consumption	180–200 mA @ 10–18 V
Lightning Surge Capability Test Method	IEEE C62.42-1991
Lightning Surge Current	20 kA

Mechanical Specifications
Connector Interface	7-16 DIN Female
Connector Interface Style	Long neck
Ground Screw Diameter	6.00 mm
Wind Loading, maximum	54 N @ 115 km/h 12 lbf @ 115 km/h
AISG Connector Standard	IEC 60130-9
Finish	Painted
Color	Gray
Mounting Pipe Hardware	Band clamps
Mounting Pipe Diameter	40–160 mm

Environmental Specifications
Operating Temperature	-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity	Up to 100%
Ingress Protection Test Method	IEC 60529:2001, IP67

Dimensions
Height	275.0 mm \| 10.8 in
Width	210.0 mm \| 8.3 in
Depth	62.0 mm \| 2.4 in
Weight	4.2 kg \| 9.3 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2008	Designed, manufactured and/or distributed under this quality management system

Write a Review